Remotek Corporation WA110 Manual Do Utilizador
Wireless LAN Access Point(RFMD) WA110 User Manual
12
5. Modify Configurations by AP SNMP Manager:
5.1. AP SNMP Manager
Atmel Utilities AP Configuration AP Configuration
5.1.1. Connect to Access Point
Select File Connect to Access Point.
A screen Connect to Access Point will pop up:
A screen Connect to Access Point will pop up:
IP Address: Type IP address of AP (Please refer to section: 5.4.1 IP Address)
Community: Type a password to connect AP. (The default password is “public”)
Authority:
Community: Type a password to connect AP. (The default password is “public”)
Authority:
1. User: Read Only! You can only read AP configurations.
2. Administrator: Read and modify! You can not only read but also modify AP
2. Administrator: Read and modify! You can not only read but also modify AP
configurations.
After completing all settings, click OK to connect to
AP
.
5.1.2. Find Access Point
Select File Find Access Point.
A screen Available Access Points will pop up and list all the available Access Points on the
same subnet. Choose one of the AP and Click Connect to connect it.
A screen Connect to Access Point will pop up. Please repeat the procedures shown on
section 5.1.1.