Elelux International Ltd. OM30Q Manual Do Utilizador

G e t t i n g   S t a r t e d   G u i d e  

(1)  Remove the battery cover on the top. 

(2)  Insert the Alkaline Batteries enclosed in the box into the battery compartment, and follow the 

direction mark to insert battery.   

(3)  Replace the cover carefully. 

Note: Once the battery is placed correctly, the mouse optical LED located at the bottom will be 

lighted up. If the LED don’t light up, please remove the batteries, make sure the battery 

direction and install anew. 

Using USB port user: 

Please connect the  receiver to the USB port on the computer. For USB-port installation, 

Windows 98 or higher or Macintosh®  OS 8.6 or higher is required. Under Windows environment, 

you may be prompted to insert the Windows software CD. Please insert this CD into the  

computer’s CDROM when you are asked to do so and follow the onscreen instructions. 

Using PS/2 port user: 

(a) To connect to a PS/2 port, please turn off your computer. 

(b) Connect the PS/2 adapter to the receiver or USB cable . And USB cable connect to receiver 

(c) Insert the  adapter into the PS/2 port on the computer. 

(d) Turn on the computer. 

After you insert the receiver to your computer, the LED on the receiver will light up. Press the  

ID button on receiver, and then press the ID button on the mouse bottom. If the receiver links 

with the mouse successfully, the LED on the receiver will blink quickly and then stop blinking. 

??

To optimize the performance of your RF reception, please make your receiver away from 

electric al devices. Avoid using your RF optical mouse on a metal surface. That may slow 

down the response of the mouse or cause the mouse fail to response. 

??

Please 

use Alkaline Batteries only. Do not mix different brand batteries or mix old and new 

batteries in the mouse. 

??

Advice to use in light-color surface. This will save battery’s life. White ,bright surfaces are 

recommended. 

??

If you will not use the mouse for a long time, please take the batteries apart to extend its 

using life. 

??

If someone use wireless product nearby, please keep 1.5 meters at least to avoid the 

interference. 

The mouse does not work or not detected.  

??

Check the USB or PS/2 port, make sure receiver is  connected correctly.