Microsoft Corporation MD-7W Manual Do Utilizador

To use the speakers with the charger, 
connect the charger to a wall outlet, 
and plug the charger cable to the 
power connector. 

If you use rechargeable batteries with 
the speakers, the batteries are not 
charged by the charger.

To install the batteries, ensure that 
the speakers are switched off, and 
press the release switch of the battery 
cover at the back of each speaker. Lift 
the cover.

Place the batteries as indicated in the 
compartment. To close the cover, 
insert the catch at the top of the cover 
into the corresponding slot on the 
speaker, and push the cover against 
the speaker until it snaps into place.

During long periods where the 
speakers are not used, remove the 

batteries to prevent damage from 
battery leakage.

When battery power is low, the orange 
indicator light starts to flash, and the 
speakers beep.

To switch on, press and hold the power 
key until the white indicator light 
turns on.

To switch off, press and hold the 
power key until the white indicator 
light turns off.

You can connect the speakers to a 
compatible music device (such as a 
music player or mobile phone with a 
music player feature) using Bluetooth 
wireless technology or the supplied 
cable. To use a Bluetooth connection, 
the music device must support the 
A2DP Bluetooth profile.

MD-7W_UG_en1_with_FCC&IC_notice.fm  Page 5  Friday, September 7, 2007  8:29 PM