Primex Wireless Inc. XR Manual Do Utilizador

 New 

transmitter  

 

Document: 1014.100                                                                                                                                ECN: 1.10 

Page 13 of 14 

 

Confidential Document 

c. 

DST Switch (same as the ST/DST switch) 

d. 

12/24 Hour Format (same as the 24H/12H switch) 

e. 

GMT Offset (same as the UTC+/UTC- switch) 

h. LAN/LOCAL 
i. NTP/GPS 

3. Diagnostics 

a. Firmware 

Rev 

b. 

Time Since Last GPS 

c. Hardware 

Revi 

d. GPS/Repeater 
e. 

Last Rptr Update 

f.  

Serial Number 

g. MAC 

Address 

 

4. GPS 

Setup 

a. 

Garmin GPS 16 Garmin GPS 18 

b. TBD 

1 

c. TBD 

2 

d. TBD 

3 

e. TBD 

4 

5. 

Tech support info 
a. 1-800-404-8112 
b. techsupport@primexwireless.com 

1.  When an error occurs, a Diagnostic Code red LED on the front of the panel flashes, informing the user of an 

error, along with the error message on the second line of the normal display.  They will then have to go into 
the main menu, then the diagnostic menu to determine the error code.  The different error codes that are active 
will be shown by highlighting the menu item such as different color, flashing, check mark, or some other 
obvious means.  Give us some feedback as to the easiest method of highlighting. 

2.  The first 10 of each type of error will be stored in the TX, along with a time and date stamp for each of these 

errors.   

3.  The TX will transmit each occurrence of an error to the server as it occurs, with a time/date stamp. 
4.  Errors and the error LED can be cleared by selecting individual errors and clearing them (with yes or no 

confirmation as to if they really want to clear the error) 

1.  Full output power (green LED lights up when transmitting correctly).  This light flashes when the power 

amplifier disabled by the repeater or by a transmitter OFF command or by a transmitter on/off schedule. 

2.  No receiver GPS or repeater (flashing yellow after 2 days of no receipt).