Summer Infant 36044R Manual Do Utilizador

MONITOR OWNER’S GUIDE

3 6 0 4 4

FCC INFORMATION 

ORDERING REPLACEMENT PARTS

CONTACT US

© 2018 Summer Infant (USA), Inc.

Colors and styles may vary.

Please retain information

for future reference.

Made in China.   11/18

1275 Park East Drive

Woonsocket, RI 02895

401-671-6551 
Summer Canada, Ltd. 

200 First Gulf Blvd., Unit C

Brampton, Ontario,

Canada L6W 4T5

905 456-8484

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful 
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
CAUTION: Changes or modifications not expressly approved by Summer Infant may void the users authority to operate this equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits 
are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate 
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. 
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or 
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or 
more of the following measures:
• Reorient or relocate the receiver
• Increase the separation between the equipment and the receiver
• Connect the equipment into an outlet on a circuit different from that     
   to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
CAUTION: 1. To comply with FCC RF exposure compliance requirements, a separation distance of at least 7.9 in. (20 cm) must be maintained between 
the antenna of this device and all persons. 2. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Summer Infant (USA), Inc. Monitor Warranty Policy
Summer Infant (USA), Inc. will repair or replace (at our option) your unit free of charge for 12 months from the date of purchase if the unit is defective in 
workmanship or materials. To claim your repair/replacement, the product must be returned to Summer Infant along with a copy of the original purchase 
receipt. In the absence of the purchase receipt, the warranty will be 12 months from the date of manufacture. This warranty does not apply to normal wear 
or damage from misuse, abuse, improper storage and handling, installation, accident, unauthorized repair or alteration. Please contact our Consumer 
Relations Team by phone at 401-671-6551 or via e-mail at summerinfant.com/contact for details. For sale and use in the USA. The warranty is null and void if 
used outside its intended territory.

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s 
licence-exempt RSS(s). Operation is subject to the following two conditions: (1)This device may not cause interference.(2)This device must accept any 
interference, including interference that may cause undesired operation of the device.
 
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique 
Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :(1)L’appareil ne doit pas 
produire de brouillage; (2)L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le 
fonctionnement.
 
This equipment complies with IC RSS‐102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and 
operated with minimum distance 20cm between the radiator and your body.
 
Cet équipement est conforme aux limites d'exposition aux radiations IC CNR‐102 établies pour un environnement non contrôlé. Cet équipement doit être 
installé et utilisé avec une distance minimale de 20 cm entre le radiateur et votre corps.

If you have issues or questions not addressed in this Owner’s Guide, 

contact us at 

401-671-6551 or www.summerinfant.com/contact

To order replacement parts or extra cameras, contact our Consumer Relations 

Team at 

401-671-6551or visit www.summerinfant.com/contact

• Camera AC Adapter: #29580-05  
• Handheld AC Adapter: #29580-13
• Extra Camera: #36054 

 

• (8) Rechargeable Ni-MH AAA size 1600mAh 4.8V batteries: #36044-10

1)    Read Instructions - All the safety and operating instructions should be read before the product is operated.

2)    Retain Instructions - The safety and operating instructions should be retained for future reference.

3)    Heed Warnings - All warnings on the product and in the operating instructions should be adhered to.

4)    Follow Instructions - All operating and use instructions should be followed.

5)    Cleaning - Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

6)    Attachments - Do not use attachments not recommended by the product manufacturer as they may cause hazards.

7)    Water and Moisture - Do not use this product near water - for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like.

8)    Accessories - Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table 

recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturer's instructions, and should use a mounting accessory recommended by the manufacturer.

9)    Ventilation - Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing 

the product on a bed, sofa, rug, or other similar surfaces. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to.

10)  Power Sources - This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products 

intended to operate from battery power, or other sources, refer to the operating instructions.

11)  Power-Cord Protection - Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where 

they exit from the product.

12)  Power Lines - An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an  outside antenna system, 

extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

13)  Overloading - Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.

14)  Object and Liquid Entry - Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.

15)  Servicing - Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

16)  Damage Requiring Service - Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:

a) When the power-supply cord or plug is damaged,

b) If liquid has been spilled, or objects have fallen into the product,

c) If the product has been exposed to rain or water,

d) If the product does not operate normally by following the operating instructions. Adjusting only those controls that are covered by the operating instructions as an improper adjustment of other controls may result  in damage and will often 

require extensive work by a qualified technician to restore the product to its normal operation,

e) If the product has been dropped or damaged in any way, and

f) When the product exhibits a distinct change in performance - this indicated a need for service.

17)  Replacement Parts - When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, 

electric shock, or other hazards.

18)  Safety Check - Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition.

19)  Wall or Ceiling Mounting - The product should be mounted to a wall or ceiling only as recommended by the manufacturer.

20)  Heat - The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

DO NOT EXPOSE TO RAIN OR MOISTURE

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Tools required for wall mount: Screwdriver and drill (not included). For adult use only.

THIS PRODUCT CANNOT REPLACE RESPONSIBLE ADULT SUPERVISION.

•  STRANGULATION HAZARD - Children have STRANGLED in cords. Keep this cord out of reach of children (more than 3 feet (0.9 m) away from the crib). Use 

enclosed Security Clips to help secure cord away from baby’s reach. Never use extension cords with AC Adapters. Only use the AC Adapters provided.

•  When an AC Adapter is plugged into an electrical outlet, do not touch the exposed end.

•  Test monitor before first use, periodically, and when changing location of the Camera.

•  Do not use monitor near water (such as bathtub, sink, etc.).

•  Keep monitor away from heat sources (such as stoves, radiators, etc.). 

•  Make sure there is proper ventilation around all monitor components. Do not place on sofas, cushions, beds, etc. which may block ventilation. 

•  This product is not a toy. Do not allow children to play with it.

•  This product contains small parts. Adult assembly required. Exercise care when unpacking and assembling the product. 

Adult assembly required. Keep small parts away from children when assembling.

•  Use only the original rechargeable battery provided. Please contact Summer Infant (USA), Inc. for replacement battery. Contact 

information can be found on the back page of these instructions or on the battery itself.

•  Do not short-circuit supply terminals.

•  Only the recommended battery or equivalent are to be used, volts and size.

•  Remove battery when product is stored for long periods of time or when battery is exhausted.

•  Dispose of exhausted battery properly.

•  Keep all batteries away from children.

732-3604400-0700

4. Use the LEFT/RIGHT  ARROW buttons to 
highlight the camera you want to delete.
5. Press MENU/SELECT button to delete camera.
The Camera icon will tur n gray once 
disconnected.

1. Press MENU/SELECT twice to enter the 
Camera Options Menu.
2. Use the  RIGHT ARROW button to 
highlight the Delete Camera icon.
3. Press MENU/SELECT.

1. Press MENU/SELECT twice to enter the 
Camera Options Menu.
2. Use the  RIGHT ARROW button to 
highlight the Select Camera icon.
3. Press MENU/SELECT.

Video from the selected camera will 
appear on the screen.
• The camera number (1-4) icon will briefly 
appear in the screen's lower right cor ner.
• The camera number icon at the top of 
the screen will change to the selected 
camera.
NOTE: If using SleepZone

4. Use the LEFT/RIGHT  ARROW buttons to 
highlight the camera you want to select.
Synced cameras appear in blue. Current 
viewing camera is outlined.
5. Press MENU/SELECT.

1. Press MENU/SELECT twice to enter the 
Camera Options Menu.
2. Use the RIGHT ARROW button to 
highlight the Scan Cameras icon.
3. Press MENU/SELECT to confirm. 

The scan status bar will appear on the 
right side of the screen.
• A red icon indicates cameras that have 
lost a signal.

• Camera Number icon in the indicator 
bar changes to show which camera is 
currently being viewed. 
• Press any button to stop scanning.

Scan Mode cycles through each active camera every 10 seconds.
NOTE:  Scan Mode is only available if more than one camera is synced with the 
handheld.

View Cam

Scan

Add Cam

Delete Cam

1. Press the MENU/SELECT button.
By default, Camera Options will be 
highlighted in the menu navigation bar.  
2. Press MENU/SELECT to confirm. 
Four Camera Option Icons will appear in 
the Menu Bar.

Note: If only one camera is synced to the 
handheld, VIEW CAM and SCAN will be 
grayed out and not available.

1.  Plug in camera. A small solid green light 
above the lens will indicate power.
If not, press and hold the 

POWER button 

for 3 seconds until the green light 
appears.
2. On the handheld, press MENU/SELECT 
twice to open the Camera Options Menu.
3. Press the  RIGHT ARROW button to 
highlight the Add Camera icon.
4. Press MENU/SELECT.

5. Press the LEFT/RIGHT  ARROW buttons to 
highlight the desired camera. 
Icons for Synced Cameras:
• Blue icons indicate synced cameras. 
• Gray icons indicate cameras not yet 
synced.
• A blue ring indicates current viewing 
camera. 
6. Press MENU/SELECT.

• A syncing icon will appear next to the 
corresponding camera number.

Your digital video monitor accepts up to 4 cameras total. 
Select the one you want to view, or use auto-scan mode to cycle through each 
camera on a 10-second rotation.

• If sync is successful: video will appear 
from the newly added camera with a blue 
ring around the camera icon.

• If sync is unsuccessful: a small camera 
with an X will appear over the camera 
icon. 
Repeat steps from this section to sync, 
making sure the camera and handheld 
are next to each other.

ADDING AND VIEWING CAMERAS 

6

The Moonlite

®

 Night Vision Boost feature helps provide better viewing of your baby, 

temporarily, when the room is dark. 
1. Press and hold the MOONLITE

 button to illuminate a small LED light on the camera.

• A 

 icon will appear in the lower right-hand cor ner of the screen while 

button is pressed. 
• When you release the button, the camera will retur n to nor mal black & white 
night vision. 
• Depending on how far you have placed the camera from the crib, you can 
optionally adjust the 

• Moonlite

1. Press the MENU button. 
2. Press the RIGHT ARROW button to 
highlight the Settings icon.
3. Press MENU/SELECT.

4.  Press the RIGHT ARROW button to 
highlight the Moonlite

®

 icon.

5. Press MENU/SELECT.

6. Press the LEFT/RIGHT ARROW buttons to adjust Moonlite

®

 brightness.

7. Press the MENU/SELECT button to exit.

Caution: Do not stare directly at Moonlite

®

 LED for prolonged periods of time.