Opticon Sensors Europe BV EE150 Manual Do Utilizador
EE-150
V-0.1
11
8 Labeling
8.1 Product Label
The product label is affixed to the ESL as shown below.
Figure 2: Product Label
Label material:
Material: Base + laminate protection against wear.
Base: PP film, thickness 80µm, backing with glue.
Laminate: PET film, clear, thickness 25µm.
RoHS compliant
Label dimension:
20.4mm x 12.4mm (w x h)
Tolerance ± 0.1mm
Corner radius 2.7mm
Material: Base + laminate protection against wear.
Base: PP film, thickness 80µm, backing with glue.
Laminate: PET film, clear, thickness 25µm.
RoHS compliant
Label dimension:
20.4mm x 12.4mm (w x h)
Tolerance ± 0.1mm
Corner radius 2.7mm
Figure 3: Product Label dimensions
Barcode area:
The size of the barcode area (without the human readable part) is 2.4 x 17.2mm).
The barcode shows the product serial number. This is a ‘B’ followed by 7 hexadecimal digits.
This serial number is the same as the MAC address in the ESL-label, with the first 9 digits
(‘3889DC000’) replaced by a ‘B’.
The size of the barcode area (without the human readable part) is 2.4 x 17.2mm).
The barcode shows the product serial number. This is a ‘B’ followed by 7 hexadecimal digits.
This serial number is the same as the MAC address in the ESL-label, with the first 9 digits
(‘3889DC000’) replaced by a ‘B’.
20.4
12.4
Radius
2.7mm
2.7mm