Opticon Sensors Europe BV H22-RFID Manual Do Utilizador
Opticon
H-22 User Manual
107
19. Clean boot and Factory Reset
19.1. Clean boot
A clean boot is when the system is started from the beginning and all drivers and settings are loaded
to their initial state. All custom settings are erased. The Custom ROM and FlashDisk partitions are
left untouched. A clean boot is performed by pressing the side scan buttons when the device is
turned on or reset, or from an option in engineering mode.
19.2. Factory reset
Factory reset is when all customer settings and data are wiped from the internal memory including
CustomROM and FlashDisk partitions and the system is reinitialized as if it was the first boot. This
can be used to solve problems when the device is not functioning as expected or if the device should
be used in another environment to ensure no old setting will cause incompatibility.
To perform a factory reset:
1.
A clean boot is when the system is started from the beginning and all drivers and settings are loaded
to their initial state. All custom settings are erased. The Custom ROM and FlashDisk partitions are
left untouched. A clean boot is performed by pressing the side scan buttons when the device is
turned on or reset, or from an option in engineering mode.
19.2. Factory reset
Factory reset is when all customer settings and data are wiped from the internal memory including
CustomROM and FlashDisk partitions and the system is reinitialized as if it was the first boot. This
can be used to solve problems when the device is not functioning as expected or if the device should
be used in another environment to ensure no old setting will cause incompatibility.
To perform a factory reset:
1.
Tap > Settings > System > Factory Reset.
2.
Enter the Device password (default 1234).
3.
Tap OK.
20. Downloadable tools (not in image)
20.1. Custom ROM Tool
The Custom ROM Tool is a tool to copy files to the hidden Custom ROM partition, view the content
of the Custom ROM partition, and provide a way to format the Custom ROM partition. The Custom
ROM Tool is not a part of the built in applications. Instead it is available for customers on request
20.2. Autorun.exe
The Autorun.exe implemented by Opticon will expose a way for the customer to install CAB-files,
run provisioning XML, and run executables aimed for configuration in a structured way. It is also
possible for the customer to develop their own version of the Autoexec.exe. The Autorun.exe is
placed in the Custom ROM area and will then perform the tasks described above at start of the
device. It is also possible to develop a custom Autoexec.exe and place in the Custom ROM area to
perform company specific tasks at startup.
The Custom ROM Tool is a tool to copy files to the hidden Custom ROM partition, view the content
of the Custom ROM partition, and provide a way to format the Custom ROM partition. The Custom
ROM Tool is not a part of the built in applications. Instead it is available for customers on request
20.2. Autorun.exe
The Autorun.exe implemented by Opticon will expose a way for the customer to install CAB-files,
run provisioning XML, and run executables aimed for configuration in a structured way. It is also
possible for the customer to develop their own version of the Autoexec.exe. The Autorun.exe is
placed in the Custom ROM area and will then perform the tasks described above at start of the
device. It is also possible to develop a custom Autoexec.exe and place in the Custom ROM area to
perform company specific tasks at startup.