Opticon Sensors Europe BV H32 Manual Do Utilizador
Opticon
H - 32
Specifications Manual
11
7. Optical Specifications
7.1. Laser Scan Specifications MDL2001
Parameter
Specification
Unit
Light-emitting element
Red laser diode
-
Emission wavelength
650 ±10 (25° C)
nm
Light output
Light output 1.0 or less
mW
Scanning method
Bi-directional scanning
-
Scanning speed
100 ±20
scans/s
Scan angle °
Scan angle: 54 ±5
°
Read angle: 44 (Min)
°
Notes:
Refer to chapter 8, “Technical Specifications,” to read about scanning performance.
7.1.1.
Tilt of Laser Scan Line
Maximum tilt between both ends of laser scan line Less than 0.92° upward tilt from
the scan origin. Maximum of 2.46 mm when measured at the point 150 mm away
from the scan origin. (Measurement was done from the center of the scan line.)
the scan origin. Maximum of 2.46 mm when measured at the point 150 mm away
from the scan origin. (Measurement was done from the center of the scan line.)
7.1.2.
Curvature of Scan
Maximum gap between the straight line connecting both ends of the laser scan line
and the actual laser scan line. Less than 1.17° curvature from the scan origin (from a
mirror motor mirror). Maximum of 3.06 mm when measured at the point 150 mm
away from scan origin. (Measurement was done from the center of the scan line.)
and the actual laser scan line. Less than 1.17° curvature from the scan origin (from a
mirror motor mirror). Maximum of 3.06 mm when measured at the point 150 mm
away from scan origin. (Measurement was done from the center of the scan line.)
Figure 1: Scan tilt and curvature