Opticon Sensors Europe BV PX36 Manual Do Utilizador
Opticon
CRD9823-RU
Specifications Manual
5
1. Abstract
This manual provides specifications for the CRD9823-RU cradle designed for the Opticon OPL
(OPL97XX and OPL98XX) series data collectors. The CRD9823-RU cradle supports USB and
RS232 interfaces and can also used to charge the OPL.
(OPL97XX and OPL98XX) series data collectors. The CRD9823-RU cradle supports USB and
RS232 interfaces and can also used to charge the OPL.
2. Overview
The CRD9823-RU cradle can be used to charge the OPL series data collectors. Additionally, it
provides a way for data communication between the OPL data collector and a host computer.
The Opticon OPL data collectors all have an IrDA communication interface and this cradle acts
as a bridge between the USB/RS232 interface available on every computer and the IrDA
interface in the OPL data collector.
provides a way for data communication between the OPL data collector and a host computer.
The Opticon OPL data collectors all have an IrDA communication interface and this cradle acts
as a bridge between the USB/RS232 interface available on every computer and the IrDA
interface in the OPL data collector.
The CRD9823-RU communicates with the OPL data collectors via infrared data
communication (IrDA1.2, low-power) and can communicate with a host computer via either
USB (USB 2.0, CDC class virtual comm. port) or RS232C.
communication (IrDA1.2, low-power) and can communicate with a host computer via either
USB (USB 2.0, CDC class virtual comm. port) or RS232C.
The CRD9823-RU has three status LED’s, a red LED that indicates that the power is switched
on, a green LED that blinks when the cradle receives data via IrDA and a yellow LED that
blinks when data is received via USB or RS232.
on, a green LED that blinks when the cradle receives data via IrDA and a yellow LED that
blinks when data is received via USB or RS232.
The baud rate for RS232 & IrDA can be configured via special software on the host computer
but it can also be configured via a block of switches that are accessible via the bottom of the
cradle. Supported baud rates are 1200, 2400, 4800, and 9600 bps, 19.2kbps, 38.4kbps,
57.6kbps and 115.2 kbps.
but it can also be configured via a block of switches that are accessible via the bottom of the
cradle. Supported baud rates are 1200, 2400, 4800, and 9600 bps, 19.2kbps, 38.4kbps,
57.6kbps and 115.2 kbps.
3. Physical Features
3.1. Dimensions
W 98.5 x D 71.5 x H 67.0 mm
3.2. Weight
80 g
4. Environmental Specifications
4.1. Operating Temperature and Humidity
Temperature: 0 to 40° C (32 to 104° F)
Humidity: 30 to 80%
4.2. Storage Temperature and Humidity
Temperature: -20 to 60° C (-4 to 140° F)
Humidity: 30 to 90%