Opticon Sensors Europe BV EE440 Manual Do Utilizador
EE440 Specifications manual
8.2. Shipment box labels
The shipment box labels are made from plain paper and are meant to show the regulatory
information on the shipment box as well as the quantity in the box. The label design is
shown below. The labels are 150mm*95mm and are made from plain paper with adhesive
backing.
information on the shipment box as well as the quantity in the box. The label design is
shown below. The labels are 150mm*95mm and are made from plain paper with adhesive
backing.
Label A shows the PO number, the Quantity in the box and the serial number range, all
encoded in barcodes as shown. In case there are two or less missing serial numbers, only
label A is required. In case there are more than 2 missing serial numbers missing, label B
is required to show the rest of the missing serial numbers.
encoded in barcodes as shown. In case there are two or less missing serial numbers, only
label A is required. In case there are more than 2 missing serial numbers missing, label B
is required to show the rest of the missing serial numbers.
TO BE DETERMINED
XXX
Figure 4: shipment box labels
12