Opticon Sensors Europe BV EE750R Manual Do Utilizador

Página de 16
 
EE-750 Specifications manual
 
 
 
 
 
6.2.  Radio Specifications 
Parameter 
Min 
Typ 
Max 
Unit 
Remarks 
Receiver sensitivity 
 
-97  
-89 
dBm 
Over the entire temp. and 
operating voltage range  
Nominal output power 
-3 
4.5 
dBm 
 
Frequency 
2405 
 
2480 
MHz 
Over the entire temp. and 
operating voltage range 
Transfer rate 
 
250Kbit/s 
 
 
 
RSSI range 
 
100 
 
dB 
Signal strength indication 
that can be reported to the 
base station 
 
6.3.  Radio Protocol 
Modified 802.15.4 (Physical layer and Media Access Control layer).  
6.3.1. 
The physical layer 
The physical layer (PHY) provides the data transmission service, as well as the interface 
to the physical layer management entity, which offers access to every layer management 
function and maintains a database of information on related personal area networks. 
Thus, the PHY manages the physical RF transceiver and performs channel selection and 
energy and signal management functions. It operates on the above mentioned frequency 
band. The PHY layer is 100% compliant and is based on direct sequence spread 
spectrum (DSSS) technique with a transfer rate of 250 kbit/s. 
6.3.2. 
The medium access control layer 
The medium access control (MAC) layer enables the transmission of MAC frames through 
the use of the physical channel. Besides the data service, it offers a management 
interface and itself manages access to the physical channel. It also controls frame 
validation, guarantees time slots and handles node associations. Finally, it offers hook 
points for secure services. The EE-750R does not make use of the optional network 
beaconing, instead it used a polling mechanism to increase power efficiency.  Some 
changes are made to the standard to allow for more efficient data frames and better 
power efficiency, especially when nodes are not connected to a base station.  
6.3.3. 
Security 
The 802.15.4 standard 128-bit AES encryption is supported. A secure method for key 
management is implemented as well. The encryption is optional though and can be 
configured via the base station. By default, the radio traffic is unencrypted.