MAXWISE Production Enterprise Ltd. BTCT5K02047 Manual Do Utilizador

•  With six-axis motion sensing technology

•  HOME button

•  Vibration Feedback Function

•  Built-in rechargable battery

•  USB charging cable included (1.2m)

Charging the Controller

•  With the system turned on (power indicator 

is lit green), connect the controller to the 

system using a USB cable. The port 

indicators of the controller flash slowly and 

charging begins. When charging has 

completed, the port indicators stop 

flashing.

Before you use the controller for the first time, or after you 

have not used it for a long time, you must charge the 

battery. (If the controller will not be used for long periods of 

time, the battery should be recharged at least once every 

three months.) 

 

Make sure that the mini-USB plug is 

aligned correctly with the port before inserting into the plug 

to avoid damaging either the port or the plug.

Recharging a battery that has not been fully discharged will 

shortens its life.

•  The controller can be used while charging.

To use this Bluetooth controller, you must 

first register or "pair" the controller with the 

PS3™ system and assign a number to the 

controller. 

Step 1: Pair the system and the controller

When using the controller for the first time or 

when using with a different PS3™ system, you 

must first pair the devices. If you turn on the 

system and connect the controller using a USB 

cable, the pairing will be completed 

automatically.

Each time you turn on the system, a number 

must be assigned to the controller. 

The controller number is shown by the 

number above the port indicators. For 

numbers 5-7, add the numbers of the lit 

indicators.  

• Pairing and assigning controller numbers can 

only be done when the system is turned on 

(when the power indicator is lit solid 

green). 

• When a paired controller is used with 

another PS3™ system, the pairing with the 

original system is cleared. Pair the 

controller with the system again if the 

controller has been used with another 

system.

• If the controller or the system is turned off, 

the port indicators on the controller will 

turn off and the assigned number will be 

cleared.  

If you disconnect the USB cable, you can use 

the controller wirelessly. To use it wirelessly, 

the controller’s battery must be charged. 

 

• The USB cable can be connected or 

disconnected while the controller and the 

system are turned on.

• If the controller does not function, press the 

HOME button and reassign the controller 

number. 

If you press and hold down the HOME button 

for more than two seconds, you can check the 

battery charge level on the screen. 

This device complies with Part 15 of the FCC 

Rules. Operation of this product is subject to the 

following two conditions: (1) this device may not 

cause harmful interference, and (2) this device 

must accept any interference received, including 

interference that may cause undesired 

operation.  

This equipment has been tested and found to 

comply within the limits for a class B digital 

device, pursuant to Part 15 of the FCC Rules. 

These limits are designed to provide reasonable 

protection against harmful interference in a 

residential installation. This equipment 

generates, uses, and can radiate radio frequency 

energy and, if not installed and used in 

accordance with the instructions, may cause 

harmful interference to radio communications. 

However, there is no guarantee that interference 

will not occur in a particular installation. If this 

equipment does cause harmful interference to 

radio or television reception, which can be 

determined by turning the equipment off and on, 

the user is encouraged to try to correct the 

interference by one or more of the following 

measures: 

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment 

and receiver. the receiver is connected. 

•Consult the dealer or an experienced radio/TV 

technician for help.

 

Changes or modifications not expressly approved 

by the party responsible for 

compliance with the FCC Rules could void the 

user’s authority to operate this

equipment.  

  

Top

1 HOME button/Port indicators

2 Select button

Left stick/L3 button

Directional pad

5 Start button

1 USB port

2 R1 button

3 R2 button

L1 button

L2 button

 button

 button

 button

 button

10 Right stick/R3 button

9

10

5

4

6

7

3

8

USB cable (supplied)

Check that the system is 

turned on (power indicator 

is lit solid green).

USB cable (supplied)

Check that the system is 

turned on (power indicator 

is lit solid green).

Step 1: Pair the system and the controller.
•  When using for the first time
•  When using with a different PS3™ system

Step 2: Assign a controller number.
Every time the system is turned on

The battery has plenty of charge.

The battery has started losing its charge.

The battery charge level is low.

The battery has no charge. The port indicators of 
the controller rapidly flash. Charge the controller. 

Press the 

HOME button.

All of the port indicators 
flash.

When the controller has 

been assigned a number, 

the port indicators for the 

assigned number turn solid 

red.  

Example: Controller number 5 

has been assigned.