AeroScout BS2040-1 Manual Do Utilizador
8
| EX3100 Exciter Hardware
Connectors Panel
Figure 4 describes the EX3100 Exciter connectors panel (bottom panel).
Figure 2. AeroScout EX3100 Exciter Connectors Panel
1. Chain In / RS232 Connection – RJ-45 interface. This connector is used
both for configuring the Exciter and for chaining it to another Exciter. When
used in a chain, this connector is used for both power and data. In addition, this
connector serves configuration purposes and may be used to power the Exciter
using a USB-to-serial adapter (ADP-050).
both for configuring the Exciter and for chaining it to another Exciter. When
used in a chain, this connector is used for both power and data. In addition, this
connector serves configuration purposes and may be used to power the Exciter
using a USB-to-serial adapter (ADP-050).
2. Chain OUT – RJ-45 connector. This connector is used for distributing
power, serial interface and data to chained Exciters.
power, serial interface and data to chained Exciters.
Power Input
The EX3100 Exciter may receive its power from a connector located on the
side. The input is 5VDC or 12VDC.
side. The input is 5VDC or 12VDC.
1
2