G-Tek Electronics Corporation BTH Manual Do Utilizador

 

11

another, it means that you are in pairing mode. Then you can release the button. If you wear the headset, you will 

hear 3 short beep tones when enter pairing mode   

After searching for a while, your other under pairing mode device (e.g. mobile phone) should list model name of 

this headset, e.g. BTH-1XX, Please confirm it following your device user documentation. Then, when pin code or 

passkey of headset is asked, please enter 0000, which is default pin code pre-stored in the headset. Then, pairing 

procedure starts and taking a few seconds, it will show pairing successful. In the meantime, you might now replace 

the given headset model name with your favorite name tag. The pairing process is then completed.    A beep tone 

will be heard on BTH-1XX when pairs successfully   

The LED indicator will resume to the standby mode (flashing blue every 3 seconds) after a short while. 

      Now that the devices are paired, you will not need to repeat the pairing process in future use as long as you are 

   using the same headset. 

7.    To pair BTH-1XX with more than one device, please repeat above 1 to 6 steps by selecting Line switch to different 

     line number.  

Remark : 1. For BTH-1XX, if you slide Line switch during pairing mode, headset will go to deep sleep mode and LED