Flextronics Sales & Marketing Ltd. NC800-GW223R1 Manual Do Utilizador
Motorola Cellular Gateway NC800 User Guide Version 2.0
Page 69 of 110
• LAN MAC Filters – You can specify a list of up to 20 MAC addresses that will be filtered according to
the MAC Filter Mode. MAC Addresses must be in the format xx:xx:xx:xx:xx:xx where xx are
Hexadecimal digits.
Hexadecimal digits.
If the MAC address list is empty you must set the MAC Filter Mode to Disabled or Deny. An empty
MAC address table does not allow LAN workstations to communicate with the Motorola Cellular
Gateway NC800 if the MAC Filter Mode field is not set to Disabled or Deny.
MAC address table does not allow LAN workstations to communicate with the Motorola Cellular
Gateway NC800 if the MAC Filter Mode field is not set to Disabled or Deny.
Firewall-> Port Filtering
This function blocks specific internal users (on the LAN side) from accessing the Internet (on the WAN side).
TCP and/or UDP packets are filtered on any combination of the following:
TCP and/or UDP packets are filtered on any combination of the following:
• The source IP address
• The destination port number (UDP or TCP)
• Day of the Week
• Time
of
the
Day
You can specify up to 10 TCP/UDP packet filters.