Flextronics Sales & Marketing Ltd. NC800-GW223R1 Manual Do Utilizador
Motorola Cellular Gateway NC800 User Guide Version 2.0
Page 78 of 110
• WLAN SSID – The SSID being used by the wireless interface.
• WLAN Channel – The current wireless LAN channel being used.
• WLAN MAC – The MAC address of the WLAN interface.
• WAN Link Status – The state of the WAN link. If there is a WAN connection then this will show
"Connected".
• WAN Link Idle Time – The time that the WAN link was idle i.e. total time PPP connection was idle.
• WAN Link Up Time – The time that the WAN link was in a connected state i.e. total time PPP
connection is established.
• WAN Link Signal Strength – The last read signal strength for the WAN (CDMA) module obtained
when the WAN module was not in data mode.
• WAN Module ESN – The ESN of the WAN module.
• WAN Firmware Version – The version of the WAN firmware currently running on the gateway.
• WAN IP Address – The IP address of the WAN interface.
• WAN Default Gateway – The IP address of the default Gateway for the current WAN connection.
• WAN Subnet Mask – The WAN Subnet Mask.
If WAN IP Settings are statically configured, the WAN IP Address, WAN Default Gateway
and WAN Subnet Mask fields display the values configured on the WAN->IP Settings page.
For dynamic WAN IP settings, the WAN IP Address, WAN Default Gateway and WAN
Subnet Mask fields will only get set once the WAN Link is in the Connected state.
and WAN Subnet Mask fields display the values configured on the WAN->IP Settings page.
For dynamic WAN IP settings, the WAN IP Address, WAN Default Gateway and WAN
Subnet Mask fields will only get set once the WAN Link is in the Connected state.
• WAN DNS Server 1 – The first DNS server IP address.
• WAN DNS Server 2 – The second DNS server IP address.
• WAN DNS Server 3 – The third DNS server IP address.
• DHCP Server Status – The status of the DHCP server (Enabled / Disabled).
Special Buttons:
Displays the Summarized status Information.
Administration-> Support Server Registration
This function allows the Motorola Cellular Gateway NC800 to register itself with a remote support server. If an
acknowledgement to the HTTP Post message is not received, the Motorola Cellular Gateway NC800
periodically re-sends the message until the acknowledgement is received.
acknowledgement to the HTTP Post message is not received, the Motorola Cellular Gateway NC800
periodically re-sends the message until the acknowledgement is received.
The support server registration URL will be provided to you by the Cellular Carrier or ISP if it has not
been configured by default on the Motorola Cellular Gateway NC800.
been configured by default on the Motorola Cellular Gateway NC800.