Linksys WVC54GCA Manual Do Utilizador

The Setup > Basic screen allows you to alter the Camera’s 

Device settings, Network settings, Wireless settings, and 
Security settings.

Setup > Basic Screen

This is the Camera name that is used by the 

Camera and the Utility to exchange data.

You may assign the Camera any name

up to 15 characters  long. Unique, memorable names 
are helpful, especially if you use multiple Cameras on 
the same wireless network.

Enter information about the Camera in

this field. You can enter up to 32 characters.

This feature allows 

you to enable or disable the Camera’s LCD and LEDs.

This is the Camera’s current date

and time. To change it, click Change, and the Set Date/
Time screen appears. To use the computer’s date and
time, click  Sync with PC; otherwise, update the  date
and time and click Set New Time. Then, click Close.

Set Date/Time Screen

Select the time zone for the Camera’s

location.

Select this to adjust

the Camera’s current time for Daylight Saving Time.

 You must unselect this option when

Daylight Saving Time finishes.

•

•

•

•

•

•

•

Select this option and fill in the NTP  Server 

Address field if you want the Camera to update its time
at regular intervals  by contacting an NTP (Network 
Time Protocol) server on the Internet.

If you want to automatically

assign the Camera an IP address from a DHCP server, 
then select Obtain Address Automatically (DHCP). If 
you want to assign the Camera a static IP address, then 
select Fixed IP Address, and complete the IP Address,
Subnet Mask,

k Gateway,

yy Primary DNS and Secondary 

DNS fields.

Complete these fields if you want

to assign the Camera a static IP address. You need to 
enter at least one DNS address.

Enter the network’s SSID or network name here.

Select the network’s mode, Ad-hoc or

Infrastructure.

If the Camera is set to Ad-hoc mode, 

select its channel setting from the drop-down menu.

Click Edit  Security  Settings to display the

Wireless Security screen.

Select the appropriate option based on your wireless 
network configuration.

This option implements no security on your wireless 
network. Data is not encrypted before transmission.

WEP is a basic encryption method, which is not as secure 
as later methods such as WPA-Personal or WPA2 Personal. 
However, it is supported by all clients.

Wireless Security > Security Mode > WEP

Select the number of the key used on the 

•

•

•

•

•

•

•

•