Hewlett Packard Enterprise Company AP134135 Manual Do Utilizador
10
Aruba AP-130 Series Access Point
| Installation Guide
Verifying Post-Installation Connectivity
The integrated LEDs on the AP can be used at this point to verify that the AP is receiving power and
initializing successfully (see
initializing successfully (see
Table 3
). Refer to the ArubaOS Quick Start Guide for further details on
verifying post-installation network connectivity.
Configuring the AP-130
AP Provisioning/Reprovisioning
Provisioning parameters are unique to each AP. These local AP parameters are initially configured on the
Controller which are then pushed out to the AP and stored on the AP itself. Aruba recommends that
provisioning settings be configured via the ArubaOS WebUI only. Refer to the ArubaOS User Guide for
complete details.
Controller which are then pushed out to the AP and stored on the AP itself. Aruba recommends that
provisioning settings be configured via the ArubaOS WebUI only. Refer to the ArubaOS User Guide for
complete details.
AP Configuration
Configuration parameters are network or controller specific and are configured and stored on the
Controller. Network configuration settings are pushed out to the AP(s) but remain stored on the Controller.
Controller. Network configuration settings are pushed out to the AP(s) but remain stored on the Controller.
Product Specifications
Mechanical
Dimensions (antenna stowed) (HxWxD):
Table 3 AP-130 Series LED Meanings
LED
Color/State
Meaning
PWR
Off
No power to AP
Green steady
Power on, device ready
Green flashing
Device booting, not ready
Red steady
System failed to initialize
ENET 0
(100/1000 Mbps)
(100/1000 Mbps)
Green/Amber off
No link
Green on
1000 Mbps link
Amber on
10/100 Mbps link
Green/amber blinking
Link activity
ENET 1
(100/1000 Mbps)
(100/1000 Mbps)
Green/Amber off
No Link
Green on
1000 Mbps link
Amber on
10/100 Mbps link
Green/amber blinking
Link activity
11A/N
Off
5 GHz radio disabled
Amber
5 GHz radio enabled in WLAN mode
Green steady
5 GHz radio enabled in 11n mode
Green flashing
5 GHz Air Monitor mode
11B/G/N
Off
2.4 GHz radio disabled
Amber
2.4 GHz radio enabled in WLAN mode
Green steady
2.4 GHz radio enabled in 11n mode
Green flashing
2.4 GHz Air Monitor Mode