Hewlett Packard Enterprise Company APEX0365367 Manual Do Utilizador
2
Aruba 360 Series Outdoor Access Points
| Installation Guide
Hardware Overview
Figure 1
360 Series Access Point
LED
The 360 Series access point is equipped with one LED that indicates the system status of the device.
This LED can be configured via ArubaOS (for AP-365 and AP-367) or Aruba Instant (for IAP-365 and
IAP-367) software into three separate modes:
Normal mode (by default): See
Table 1
Off mode: LED is off
Blink mode: LED blinks green (synchronized)
USB Console Port
The USB Micro-B console port allows you to connect the AP to a terminal or a laptop for direct local
management. Use the included USB console cable to connect the AP. You can download the
Table 1
360 Series LED Status during Boot Up
LED
Color/State
Meaning
System LED Off
No power to AP
Red
Initial power-up
Green - Flashing
AP booting
Green - Steady
AP ready and 1000Mbps Ethernet link established. The LED
turns off after 1200 seconds
Green - Yellow, 6 seconds
period
AP ready and 10/100Mbps Ethernet link established. The LED
turns off after 1200 seconds
Table 2
360 Series LED Status during Operation
LED
Color/State
Meaning
System LED Solid Red
General fault
One blink off every 3
seconds
Radio 0 fault (5 GHz)
Two quick blink off 0.5
seconds apart cycled every
3 seconds
Radio 1 fault (2.4GHz)
Grounding Point
Ethernet Port
Air Vent
USB Console Port, Reset
button and LED