Hewlett Packard Enterprise Company APIN0314315 Manual Do Utilizador

Regulatory Compliance and Safety Information Guide

0511872-01  

|  

January 2016

This document contains domestic and international regulatory compliance and safety information for 310 Series access points. 

To ensure that this device complies with the regulatory standards for your region, please refer to the sections below.







For additional specifications on this product, please refer to the product data sheet at 

www.arubanetworks.com/

safety_addendum.



Ethernet:



100/1000 Base-T auto-sensing Ethernet RJ45 interface



IEEE 802.3u (100 Base-T). IEEE 802.3ab (1000 Base-T)



Power over Ethernet IEEE 802.3at 56VDC (nominal) and 802.3af 48VDC (maximum).



Power:



48VDC power interference, support powering through an AC-to-DC power adapter (AP-AC-48V36B)



Maximum power consumption (excluding USB): 20W (PoE) or 18.5W (DC)



Operating:



Temperature: 0°C to +50°C (+32°F to +122°F)



Humidity: 5% to 93% non-condensing



Storage and transport:



Temperature: -40°C to +70°C (40°F to +158°F)

The following regulatory model names apply to the 310 Series access points:



AP-314/IAP-314: APIN0314



AP-315/IAP-315: APIN0315

All Aruba access points should be professionally installed by an Aruba Certified Mobility Professional (ACMP). The installer is 
responsible for ensuring that grounding is available and meets applicable national and electrical codes.

Tous les points d'accès Aruba doivent impérativement être installés par un professionnel agréé. Ce dernier doit s'assurer 
que l'appareil est mis à la terre et que le circuit de mise à la terre est conforme aux codes électriques nationaux en vigueur.

If a power adapter other than the Aruba-approved adapter is used in the US or Canada, it should be NRTL listed, without an 
output rated 48VDC, minimum 2A, marked “LPS” and “Class 2”, and suitable for plugging into a standard power receptacle in 
the US and Canada.