Hewlett Packard Enterprise Company MSR4000DFS Manual Do Utilizador

| Installation Guide



The INTL part follows the international schema of Brown (Hot), Blue (Neutral) and Yellow/Green 
(Ground).



With virtually all infrastructure equipment that is installed outdoors connection to AC mains should be 
accomplished with an outdoor rated junction box.



In the event that a plug is wired onto the cable assembly, the electrician must follow all instructions 
provided while attaching a plug to the cable assemblies. The connections must be consistent with the 
local electrical code. The use of plugs with infrastructure equipment is suitable only for temporary 
installations where the nuisance tripping of the GFI plugs is considered tolerable.

The assembly instructions for the CKIT-AC-M is shipped along with the parts. All instructions must be 
followed to ensure proper assembly of the connector onto the cable.

The specifications for third-party cables used with the CKIT solution are as follows:



AC power cable specifications (when using AC connector kit and custom cable): minimum voltage/
current rating 250V/1A, diameter 6-12mm, rated for outdoor use

Figure 33  AC Power Cable Connector

1. Remove the protective cap on the power interface. 

2. Insert the power cable connector into the power interface and hand-fasten the locknut. 

3. Water-proof the power cable connection with PVC insulation tape, adhesive insulation tape and strap.

The connection to the AC mains must be implemented by a qualified resource in a manner that is consistent with 

the electrical code in force in the jurisdiction of deployment. In many countries a licensed electrician must perform 

this operation. In Japan, this would require an electrician certified by the Ministry of Economy, Trade, and Industry.

AC Power Cable Connector

Hot

Ground

 Neutral