Hewlett Packard Enterprise Company MST200DFS Manual Do Utilizador

| Installation Guide

A USB serial console port is provided for connection to a terminal, allowing direct local management. Use 
the included USB console cable to connect to the router. You can download the necessary driver for USB-
UART adapter from 

support.arubanetworks.com

 under the Tools & Resources tab.

Use the following settings to access the terminal:

The baud rate setting depends on the manufacture date of the MST200 (before or after March 2012) and the 
Serial Number (14 characters or 9 characters). The table above lists all the SKUs for MST200 along with the 
corresponding baud rate.

The type of power interface on the MST200 depends on the model that you have purchased.



MST2HP: This version does not include a power interface since it is only powered by PoE+ (802.3at).



MST2HAC: One AC power connector.

The MST200 is equipped with a 10/100/1000Base-T Gigabit Ethernet port for wired network connectivity. On 
the MST2HP, this port also supports IEEE 802.3at Power over Ethernet (PoE), accepting 48 VDC as a 
standards-defined powered device (PD) from a power sourcing equipment (PSE) device, such as a PoE 
midspan injector. Inversely, the MST2HAC can act as a PSE device to provide IEEE802.3af PoE power to 
devices such as a video camera, connected to the Ethernet port.

Table 1  Console Settings

MST2H13N0
MST2H13N0-JP
MST2H13N0-US

14 characters 
(For example: 
26A02110500467)

115200

8

None

1

None

MST2HP
MST2HP-JP
MST2HP-US
MST2HAC
MST2HAC-JP
MST2HAC-US

9 characters 
(For example: 
AZ1234567)

9600

8

None

1

None