Hewlett Packard Enterprise Company MST200DFS Manual Do Utilizador
8
Aruba MST200 Wireless Mesh Router
| Installation Guide
POE
Displays PSE
power output
status
power output
status
Off
Device is not sourcing PoE power
On (Green)
Device is sourcing PoE power to a
powered device in 802.3at mode
powered device in 802.3at mode
On (Amber)
In 802.3at mode
ENT
LAN/Network Link
Status
Status
Off
Ethernet link unavailable
On (Amber)
10/100 Mbps Ethernet link
negotiated
negotiated
On (Green)
1000 Mbps Ethernet link
negotiated
negotiated
Blinking
Traffic on Ethernet link
RF
5GHz Radio Status
Off
No active BSS (for access) and
WDS neighbor with uptime < 5s
WDS neighbor with uptime < 5s
On (Amber)
At least one active BSS (for
access) or at least one WDS
neighbor with uptime >= 5s
access) or at least one WDS
neighbor with uptime >= 5s
Table 3 MST2HAC LED Status Indicators (Continued)
LED
Function
Indicator
Status
Starting with MeshOS 4.5, you can turn off the LEDs in the MST200 devices using the WMI and CLI. The LEDs are
enabled by default. This option may be used to disable the LED lights in a MST200 device that is mounted in an
elevated place on the city streets or residential areas, to avoid unwanted attention or disturbance. This feature turns
off only the LED lights that indicate the software status, for example the RF. The LEDs that indicate the hardware
status, for example Power, P/S, POE, and ETH, cannot be turned off using this feature. For additional details, refer
to the Aruba MeshOS User Guide and the Aruba MeshOS Command Reference Guide.