SendFar Technology Co. Ltd. OAB-04004 Manual Do Utilizador

The IP Configuration method is different in each Operating Mode. User
could refer to the following descriptions for details.

„

Step 1 Select the Wireless Client Bridge mode, and enter the IP Address

manually into the Bridge IP Address field.

Step 2 Use Bridge IP Address setting to assign or change the bridge’s IP

address.

Step 3 Click FINISH at the bottom of this page to complete the

modification of IP address.

„

In this mode, user can assign a Wireless and Ethernet IP address to the
SF-3000 manually.

The NAPT function allows home users and small businesses to connect
their network to the Internet cost-effectively and efficiently. User has to
enable it to allow the subscribers to connect to the Internet in this mode.

Click FINISH at the bottom of this page to complete the IP address
modifications after enabling NAPT function.

Sometimes, the operator might expose the internal servers on the local
intranet to the public Internet. For this, you must create the Virtual Server
Mapping for these invisible internal servers.

Step 1 Select the “/General Config/ TCP/IP/Virtual Server”, and then the

Virtual Server screen appears. The figure below shows the current
virtual server entry table. (The Virtual Server Mapping pool is
empty as default)

Step 2 Click Add, and the Virtual Server Entry Edit page appears as the

figure shown below.