SendFar Technology Co. Ltd. ORB-04002 Manual Do Utilizador
22
Step 4: Configure IEEE 802.11b WLAN parameters (as shown in Figure 2-
9)
In this page, enter the Channel (default is 1), rts Threshold (default is 250),
frag Threshold (default is 1600), SSID (default is rb8100) and Station
Name (default is ap) that are suitable for your radio network and then you
can clicked radio button to disable WEP or enable 64/128 bit WEP services
(default is disable), if WEP is enabled, you must input corresponded Default
Key index and WEP Key. After that, click NEXT at the bottom of this page to
complete the modification of this page.
9)
In this page, enter the Channel (default is 1), rts Threshold (default is 250),
frag Threshold (default is 1600), SSID (default is rb8100) and Station
Name (default is ap) that are suitable for your radio network and then you
can clicked radio button to disable WEP or enable 64/128 bit WEP services
(default is disable), if WEP is enabled, you must input corresponded Default
Key index and WEP Key. After that, click NEXT at the bottom of this page to
complete the modification of this page.
Figure 2-9
23
Step 5: Preview the configured setting of this RB (as shown in Figure 2-10)
This page will present the current settings of the RB to the system
administrator, the operator can easy to view all running configuration in here.
After that, click Save button to store the changes to the RB.
This page will present the current settings of the RB to the system
administrator, the operator can easy to view all running configuration in here.
After that, click Save button to store the changes to the RB.
Figure 2-10