Controlled Electronic Management Systems Ltd INFOPROX Manual Do Utilizador

InfoProx Hardware Installation 

InfoProx Entry   

The enclosure is designed to mount directly onto a standard UK or European (French) 
electrical containment box (USA installations require an adapter plate), and standard 
conduit and fittings can be used. A clear polycarbonate screen covers the LCD for 
protection. 

Cables are pulled through the conduit and terminated in the containment box. The 
following cables are required: 

2-pair (Belden 8723) cable for power and data 

4-pin socket  (J3) 

5-pair (max) cable for inputs and output 

10-pin socket  (J2) 

2-pair (Belden 8723) cable to exit reader 

1 RS485 cable for female RJ45 connector  

4-pin socket  (J3) 

4-pin socket  (J5) 

The various cables use Phoenix Contact connectors for the unit’s inputs and outputs. 
The cables are secured into screw terminals. A flat blade screwdriver of 1/8” or less is 
recommended. 

 

The Phoenix Contact terminals used for the power and 
communication connections can accommodate two leads 
fitted into one terminal. 

Two stainless steel tamper-resistant mounting screws are supplied and are concealed 
behind specially molded covers when installation is complete.