Controlled Electronic Management Systems Ltd INFOPROX Manual Do Utilizador

Configuring the Door Control Unit 

InfoProx Entry   

Once Timezone start and end have been set, you can define an operating mode 
by choosing a time zone type.  If you don’t want to use time zone types, press # at 
any time to bypass individual Timezone Types configuration.  

Figure 8 illustrates the most common time zones between a start and end time of 
8:00 am (08:00) and 5 pm (17:00). 

 

Because Normal Mode (Card and PIN) is the default mode for the reader, which 
is in effect 24 hours, setting up a time zone for Normal mode is only useful for 
weekends, holidays, or special situations. For instance, a time zone might be set 
to Free or PIN from 08:00 to 17:00 Monday through Friday, but on weekends, the 
administrator might set the time zone type to Normal, allowing access only with a 
card.  You could then set the time zone to Free or PIN on Monday, which allows 
the time zone times to stay intact. Then the administrator only has to change time 
zone types each week. 

 

1. 

At the Config TZ Type menu, press 0-Yes. 

The following prompt appears. 

 

1 Normal, 2-PIN 
3-Free, 4-Swipe 

Select one of the four menu choices.  These menu items are described 
on pages 24 ad 25. 

This screen will display only if Config Time has been set.