Controlled Electronic Management Systems Ltd INFOPROX Manual Do Utilizador
Card Management
InfoProx Entry
Change Password
To preserve security, change the program password periodically.
To change the password
1.
Press
Ù when in the Administration menu to display the remaining
available menus.
4-Diag, 5-Pword
6-Backup
6-Backup
2.
Press 5 to change the password.
The following prompt appears:
Set Password
3.
Enter a four-digit password. As the password is entered, an asterisk
appears on the display and the reader emits a beep at each key press.
After the password is entered, the prompt
appears on the display and the reader emits a beep at each key press.
After the password is entered, the prompt
Verify Password
requests verification.
4.
Re-enter the password.
The password is accepted upon verification and the following prompt
appears:
appears:
Password OK
When a reader is first installed, no password is stored. You must follow
steps 1 through 4 to enter a password code.
steps 1 through 4 to enter a password code.
THE PASSWORD MUST BE RECORDED AND
STORED IN A SAFE LOCATION. IF THE
PASSWORD IS FORGOTTEN, THERE IS NO WAY
TO GAIN ACCESS TO ALTER ANY PART OF THE
READER'S SETUP. IF THIS HAPPENS, THE
READER MUST BE RETURNED TO THE
SUPPLIER FOR REPROGRAMING.
STORED IN A SAFE LOCATION. IF THE
PASSWORD IS FORGOTTEN, THERE IS NO WAY
TO GAIN ACCESS TO ALTER ANY PART OF THE
READER'S SETUP. IF THIS HAPPENS, THE
READER MUST BE RETURNED TO THE
SUPPLIER FOR REPROGRAMING.
54
Software
House