Murata Machinery Limited Logistics & Automation Division DVM192 Manual Do Utilizador
[USER NAME]
Approval Specifications for [TYPE NAME] (SRCC-Electrical) (3 / 35)
©Murata Machinery,LTD.Clean Systems Division/ Engineering Dept.
DOC.No.
[DOCUMENT NUMBER]
1 OUTLINE
1.1 General Construction
SRCC (Sky Rav Clean Controller) consists of two control systems.
One control system is OPC (Object oriented Panel PC), which receives remote
commands from MCS computer (Host) and sends transport commands to SRC.
OPC also monitors transport status and errors in the control equipment, and it
controls the functions of manual operations performed by operators. OPC’s
operations are compliant with GEM/IBSEM, and the functions such as a remote
command, event management, alarm management and status variable
management are provided.
The other control system is MPC (Murata Programmable Controller), which
controls the devices and status (e.g.: the indicators, the power supply status, the
SRC status, error displays and the fire shutter) on the rail.
One control system is OPC (Object oriented Panel PC), which receives remote
commands from MCS computer (Host) and sends transport commands to SRC.
OPC also monitors transport status and errors in the control equipment, and it
controls the functions of manual operations performed by operators. OPC’s
operations are compliant with GEM/IBSEM, and the functions such as a remote
command, event management, alarm management and status variable
management are provided.
The other control system is MPC (Murata Programmable Controller), which
controls the devices and status (e.g.: the indicators, the power supply status, the
SRC status, error displays and the fire shutter) on the rail.
1.2 FCC Warning
This equipment includes the wireless communication unit inside It is metal cased and
locates at the center area inside of this equipment
FCC WARNING
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
could void the user's authority to operate the equipment.
CAUTION
To keep proper efficiency, never use the parts such as wire harness which are not
assembled originally.
To keep the frequency accuracy, avoid the mechanical shock.
assembled originally.
To keep the frequency accuracy, avoid the mechanical shock.
NOTICE
This equipment ha been tested and found to comply the limits for a Class A digital device,
pursuant to part 15of the FCC Rules. These limits are designed to provide reasonable
pursuant to part 15of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio
commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. Operation of this equipment
in a residual area is likely to cause harmful interference in which case the user will be
may cause harmful interference to radio communications. Operation of this equipment
in a residual area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
This device is professionally installed and thus meets the antenna requirement of FCC
15.203.