Bioscrypt Inc. 4GCRO Manual Do Utilizador
Part # 430-4G-050-00-005
© 2011 - L-1 Identity Solutions Inc. All rights reserved
© 2011 - L-1 Identity Solutions Inc. All rights reserved
Configure Device
Figure 6-3 Server Communication Parameter
6. In the list, click the icon of the device you want to register. The server communication
parameter dialog box is displayed. A Register Device dialog box is displayed. Select the
communication parameter (if connecting via RS-232 or RS-485), enter the appropriate
Port, Baud Rate, Device ID, and select the communication protocol from the drop-down. If
connecting via enter the network IP address of the device (select the DHCP check box if
dynamic IP addressing is used).
communication parameter (if connecting via RS-232 or RS-485), enter the appropriate
Port, Baud Rate, Device ID, and select the communication protocol from the drop-down. If
connecting via enter the network IP address of the device (select the DHCP check box if
dynamic IP addressing is used).
Figure 6-4 Register Device Dialog Box
7. Enter a Device Name.
64