Bioscrypt Inc. 4GCRP Manual Do Utilizador
Part # 430-4G-050-00-004
© 2011 - L-1 Identity Solutions Inc. All rights reserved
© 2011 - L-1 Identity Solutions Inc. All rights reserved
Install Hardware
Figure 4-10 Connections for Internal Relay Operation
The power supply for the external relay must be chosen to match the operating voltage and
current of the external relay coil, but its voltage must not exceed the 4G Lite device's internal
relay maximum voltage rating of 250 volts.
current of the external relay coil, but its voltage must not exceed the 4G Lite device's internal
relay maximum voltage rating of 250 volts.
The external relay should be connected. Note that snubber diodes (1N2007 or equivalent)
should be connected across the external relay coil and the deadbolt/door strike.
should be connected across the external relay coil and the deadbolt/door strike.
Figure 4-11 Connections for External Relay Operation
55