Bioscrypt Inc. 4GCRP Manual Do Utilizador

Part # 430-4G-050-00-004
© 2011 - L-1 Identity Solutions Inc. All rights reserved

Configure Device

Figure 6-8 Step 3 Server Communication Parameter Dialog Box

8. Select the radio button that corresponds how the server will connect to the device, either

by Serial Port or by Ethernet.

9. If connecting via RS-485, enter the appropriate Port, Baud Rate, and Device ID and

select the communication protocol from the dropdown. If connecting via Ethernet, enter
the network IP Address of the device (select the DHCP check box if dynamic IP
addressing is used).

10.Click Next. The Step 4 Register Device dialog box is displayed.

Figure 6-9 Step 4 Register Device Dialog Box