Redline Communications Inc. AN100UXA Manual Do Utilizador
User
AN-100U/UX Base Station
Manual
70-00058-01-04
Proprietary Redline Communications © 2010
Page 31 of 136
April 19, 2010
3.1.5 System Section
This section describes other general features of the front panel.
System LEDs
The System LEDs indicate power supply status and system faults.
Figure 11: System - AN-100U/UX System LEDs and Reset Switch
System Pwr LED
The Pwr LED lights green to indicate normal operation.
Table 17: System - Pwr LED Indications
LED
Description
ON
Normal operation.
FLASH
Indicates an issue with the system power supplies:
AN-100U:
AN-100U:
When dual power supplies are installed, and
the secondary power supply is not available
(failed or powered off).
the secondary power supply is not available
(failed or powered off).
AN-100UX: The primary or backup power supplies is not
available (failed or powered off).
OFF
System is turned off.
System Fault LED
The Fault LED lights red when a system fault is detected.
Table 18: System - Fault LED Indications
LED
Description
OFF
Normal operation.
FLASH
Indicates an issue with one or more of the system power
supplies:
AN-100U:
When dual power supplies are installed, and
the secondary power supply is not available
(failed or powered off).
the secondary power supply is not available
(failed or powered off).
AN-100UX: The primary or backup power supply is not
available (failed or powered off).
ON
Serious problem with the system hardware. Refer to the
Troubleshooting section.