Redline Communications Inc. AN100UXA Manual Do Utilizador
User
AN-100U/UX Base Station
Manual
70-00058-01-04
Proprietary Redline Communications © 2010
Page 94 of 136
April 19, 2010
5.2.5 ipAddress
The ipAddress command is used to view and configure the base station IP address
parameters.
parameters.
Table 39: CLI - IP Address Command
Command
Parameter/Description
set
Modify the base station network IP settings.
Address: <IP Address>
Address: <IP Address>
Enter new IP address.
XXX.XXX.XXX.XXX
Mask: <IP Mask>
Mask: <IP Mask>
Enter new Netmask value.
XXX.XXX.XXX.XXX
Dhcp: Enable or disable DHCP support.
Dhcp: Enable or disable DHCP support.
0:
- Static address
1:
- DHCP allocated address.
Gateway < Default gateway>
Enter new gateway address. Requires
confirmation to proceed.
show
Display all IP address information.
Structure --- <<SC IP Address Data>>
Address:......................192.168.20.94
Mask:.........................255.255.255.0
Dhcp:.........................StaticIP(0)
Gateway:......................192.168.20.250
Address:......................192.168.20.94
Mask:.........................255.255.255.0
Dhcp:.........................StaticIP(0)
Gateway:......................192.168.20.250
5.2.6 monitor
The monitor command is used to view a dynamically updated screen of statistics for the
base station.
base station.
Table 40: CLI - Monitor Command
Command
Parameter/Description
monitor
Dynamic display of base station statistics values. For example:
MacFrameNumber: 11296
MacStations:
MacStations:
5
MacUlServiceFlows: 3
MacDlServiceFlows: 3
MacDlUsage:
MacDlServiceFlows: 3
MacDlUsage:
7 %
MacUlUsage:
3%
MacCrcErrors:
0
MacSymErrors:
0
MacDlSdus:
3590
MacUlSdus:
1889
MacDlMpdus:
3574
MacUlMpdus:
2378
MacDlSecMgm:
1353730
MacUlSecMgm:
1346805
MacDlDefaultSdus:
0
MacUlDefaultSdus:
0
MacFpc:
9
MacBwr:
1928
MacPgb:
0
PhyCinr:
31.5 dB
PhyRssi:
-12.0 dBfs
PhyFofs:
183 Hz
PhyCorb:
0
5.2.7 reboot
The reboot command is used to remotely reset the base station.
Table 41: CLI - Reboot Command
Command
Parameter/Description
reboot
Reboot the base station. Confirmation is required.