Redline Communications Inc. SUIIRM Manual Do Utilizador

™

 

 

 

70-00078-01-02-DRAFT 

Proprietary Redline Communications © 2008 

May 12, 2008 

Page 44 of 50

 

Table 26: Specifications - Indoor Wireless Subscriber  Modem 

Power Requirements: 

Auto-sensing 110/220/240 VAC 50/60 Hz, 10.5 W 

Compliance: 

EMC: EN 301 489-1, EN 301 489-4, EN 55022/CISPR 22 

 

RF: EN 301 021, EN 301 753, IC RSS-192, FCC Part 90/15 

 

Safety: IEC 60950-1, EN 60950-1, UL 60950-1 

Operating Temperature: 

-5 C to 40 C 

Antenna: 

Integrated flat panel (10.44 dBi) 

Dimensions (L x W x H):  

8.9 x 7.0 x 20.6 cm (3.5 x 2.74 x 8.12 in)

 3

 

Weight: 

0.45 Kg (1.0 lb) 

3

 

 

1 

Frequency range dependant on installed radio option, license, and regulatory domain. 

2 

Actual Ethernet data throughput is dependent on channel size, protocols, packet size, burst 

rate, transmission latency, and link distance. 

3 

Based on a subscriber unit with integrated vertical antenna and stand attached 

 

Table 27: Troubleshooting - Event Log Messages 

Add classifier [CID: XXXX, 

Idx: nn] 

A classifier with the following CID has been added. 

Broadcast Opportunity 

Corrupted 

Opportunities have been received for initial ranging, but the 

opportunity is not appropriate (i.e. too short) for this subscriber. 

Broadcast Ranging 

Opportunity Received 

This message indicates that the base station has provided an 

opportunity for subscriber registration. 

Broadcast Ranging 

Opportunity Timeout 

This message indicates that the base station has not provided 

an opportunity for new subscriber registration within the last 10 
seconds. 

Classifier deleted [Idx: nn] 

The specified classifier has been deleted. 

Classifiers deleted for SF 

with CID XXXX 

All classifiers have been cleared for the specified service flow. 

DCD Receiving Timeout 

The subscriber has not received downlink channel descriptors 

for five consecutive opportunities. The subscriber will now 
restart the ranging process in an attempt to re-establish 
wireless synchronization. 

Deregistration DREG-CMD, 

action code: nn 

The subscriber has de-registered. 

Deregistration DREG-CMD, 

action code: nn 

base station has requested that subscriber should deregister. 

DHCP Error 

There has been an error in obtaining a DHCP lease 

Downlink Burst Profile 

Adjusted [BP: nn] 

Downlink modulation rate has been adjusted by the base 

station. 

Downlink Burst Profile 

Change Attempt [BP: nn] 

A request to change the downlink modulation rate has been 

made based on locally configured CINR thresholds.