Vocera Communications B3000N Manual Do Utilizador
BADGE FEATURES
29
VOCERA BADGE USER GUIDE
When you use the Up and Down buttons to adjust the volume rather than using the Volume
menu, the change affects only the listening mode in use at the time. That is, if you are using a
headset and you adjust the volume during a call, you change the volume for the headset only. If
the Announce Through Speaker property is enabled (see
menu, the change affects only the listening mode in use at the time. That is, if you are using a
headset and you adjust the volume during a call, you change the volume for the headset only. If
the Announce Through Speaker property is enabled (see
on page 48), you change the volume for the badge speaker only (even if you're
using a headset).
To adjust the volume when you are on a call:
Do either of the following:
• Press the Up button as many times as necessary to increase the volume to the level you
• Press the Up button as many times as necessary to increase the volume to the level you
prefer.
• Press the Down button to decrease the volume.
To adjust the volume when the B3000n or B3000 badge is idle:
1. Hold the badge, and orient it so that you can read the screen.
2. Press the Select button to see the menu, and then press the Up button until you see the
1. Hold the badge, and orient it so that you can read the screen.
2. Press the Select button to see the menu, and then press the Up button until you see the
Settings
icon.
3. Press the Select button to choose the Settings menu.
4. Press the Select button again to choose the Volume menu.
4. Press the Select button again to choose the Volume menu.
The display prompts you to select one of the following modes:
•
Speaker
•
Headset
•
Privacy
5. If necessary, press the Up or Down buttons to move the highlight, then press the Select
button to set the volume for the specified mode.
6. Do either of the following:
• Press the Up button as many times as necessary to increase the volume to the level you
prefer.
• Press the Down button to decrease the volume.
The display changes accordingly.
7. Press the Select button to set the new volume level and return to the main screen.
To adjust the volume when the B2000 is idle:
1. Hold the badge, and orient it so that you can read the screen.
2. Press the Select button to see the menu, and then press the Up button until you see the
1. Hold the badge, and orient it so that you can read the screen.
2. Press the Select button to see the menu, and then press the Up button until you see the
Volume
icon.
3. Press the Select button to choose the Volume menu.
The display prompts you to select one of the following modes:
•
Speaker
•
Headset
4. If necessary, press the Up or Down buttons to move the highlight, then press the Select
button to set the volume for the specified mode.
5. Do either of the following:
• Press the Up button as many times as necessary to increase the volume to the level you
prefer.
• Press the Down button to decrease the volume.
The display changes accordingly.
6. Press the Select button to set the new volume level and return to the main screen.