Huawei Technologies Co. Ltd HW-TE60 Manual Do Utilizador
HUAWEI TE40&TE50&TE60 Videoconferencing
Endpoint
Administrator Guide
Endpoint
Administrator Guide
5 Device Control
Issue 01 (2014-12-23)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
46
5
Device Control
About This Chapter
After a conference starts, you can control the video and audio devices on the endpoint web
interface to obtain the expected conference effect.
interface to obtain the expected conference effect.
5.1 Viewing the Video
After the video monitoring function is enabled, you can view the video and presentation of
local and remote sites on the endpoint web interface.
local and remote sites on the endpoint web interface.
5.2 Controlling a Camera
You can perform pan, tilt, and zoom (PTZ) control over a local or remote camera.
5.3 Setting a Camera Preset
Camera presets are camera positions you set and save ahead of time. A camera preset stores
the pan, tilt, and zoom settings of the camera. You can easily control the camera by switching
between camera presets. You can configure remote camera presets before and during
conferences.
the pan, tilt, and zoom settings of the camera. You can easily control the camera by switching
between camera presets. You can configure remote camera presets before and during
conferences.
5.4 Selecting Video Sources
The endpoint provides multiple video input ports for connecting to video devices. When
multiple video devices are connected, you can set one video device as the local video source
and another one as the local presentation source. You can also select the video or presentation
to be displayed through video output ports.
multiple video devices are connected, you can set one video device as the local video source
and another one as the local presentation source. You can also select the video or presentation
to be displayed through video output ports.
5.5 Controlling Audio
On your endpoint, you can adjust the audio effects. For example, you can adjust the volume of
the microphone and speaker.
the microphone and speaker.
5.6 Setting the Combined Picture
With the combined picture function, you can view multiple videos (such as the local and
remote videos and presentations) in Picture in Picture (PiP) or split-screen mode on one
display.
remote videos and presentations) in Picture in Picture (PiP) or split-screen mode on one
display.
5.7 Setting Camera Parameters
On your endpoint, you can set the camera parameters, including video mode, noise reduction,
and video resolution. You can view the video result of your settings on the display connected
to your endpoint.
and video resolution. You can view the video result of your settings on the display connected
to your endpoint.