Huawei Technologies Co. Ltd HW-TE60 Manual Do Utilizador
HUAWEI TE40&TE50&TE60 Videoconferencing
Endpoint
Administrator Guide
Endpoint
Administrator Guide
5 Device Control
Issue 01 (2014-12-23)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
57
Parameter
Description
Setting
details. Over-sharpening will
make video less realistic.
make video less realistic.
−
Brightness: specifies the video
output level that changes the
brightness of the video displayed
on the monitor.
output level that changes the
brightness of the video displayed
on the monitor.
−
Hue: adjusts the video color.
−
Saturation: adjusts the grayscale
of each color. The higher the
saturation, the brighter a color.
of each color. The higher the
saturation, the brighter a color.
Noise
reduction
reduction
Removes noise artifacts from video. A
larger value causes the video to have less
noise but detail may also be lost.
larger value causes the video to have less
noise but detail may also be lost.
The default value is Low.
Set output
resolution
automaticall
y
resolution
automaticall
y
Specifies whether the camera
automatically sets the video output
resolution.
automatically sets the video output
resolution.
The default value is Disable.
Video
resolution
resolution
Specifies the video output resolution for
the camera. This parameter is available
only when Set output resolution
automatically is set to Disable.
the camera. This parameter is available
only when Set output resolution
automatically is set to Disable.
The default value is 1080p
60Hz.
60Hz.
Image
inversion
inversion
Specifies whether the video input from
the camera is rotated by 180 degrees.
When the camera is hung, set this
parameter to Enable.
the camera is rotated by 180 degrees.
When the camera is hung, set this
parameter to Enable.
The default value is Disable.
----End
5.8 Setting Preferred Video Parameters
If you find that the displayed video deviates from its normal position, adjust the picture offset.
If a blurring or slight jitter issue occurs in the video, adjust the sampling phase.
If a blurring or slight jitter issue occurs in the video, adjust the sampling phase.
Background
VGA or YPbPr image offset may occur in video input or output, such as when the computer
desktop is displayed on the display device.
desktop is displayed on the display device.
A blurring or slight jitter issue may occur in the video displayed on the display device. In this
case, you can set the sampling phase to adjust the color.
case, you can set the sampling phase to adjust the color.
Procedure
Step 1 Choose Device Control > Device Control and click the Preference–Video tab.
Step 2 Adjust the video parameters described in
Table 5-4
.