Corinex Communication Corp. POWERLINE-WLA Manual Do Utilizador

Locate an optimum location for the Access Point. The best place for the 
Access Point is usually at the center of your wireless network, with line of 
sight to all of your mobile stations.

 

Fix the direction of the antenna. Try to place it in a position which can 
best cover your wireless network. 

Plug the supplied 

AC power adapter to 

the 

Corinex Wireless to Powerline Access Point 

and consequently into an 

AC outlet

. Use only the power adapter supplied with the Access Point. 

After the 

Corinex Wireless to Powerline Access Point is powered ON, verify 

LED functionality below:

     •   The LED on the Powerline side labelled LINK should be ON

     •   The LED on the Wireless side labelled POWER should be ON

Note: All other wireless devices must be operating in the infrastructure 
mode, so that they can communicate with Access Point. If any wireless 
device is configured in the ad-hoc mode, it WILL NOT be recognized by 
the Access Point.