Saitek Electronics Ltd PS30-2 Manual Do Utilizador

 

 

Your Cyborg evo Wireless uses one AA alkaline battery (supplied) which should give up 
to 50 hours of use. To fit the battery, open the battery compartment on the bottom of 
your joystick by sliding back the cover. Insert the AA battery in the direction shown and 
replace the cover. 

The Saitek Cyborg evo Wireless features an LED (Light Emitting Diode) on the top of the 
stick which shows how much power is left in the battery. A 

 light means there is 

between 20-80% of power remaining; 

 means there is between 10-20% power 

remaining; and 

 means there is less than 10% power and you will soon have to 

replace the battery. 

Unclip the wireless receiver (or dongle) from the bottom of the evo Wireless joystick and 
plug into one of your computer’s USB ports.  

Your Cyborg evo Wireless features a sleep mode to conserve battery life. After ten 
minutes of no activity, the stick will power down and the head LED will switch off. Press 
any of the buttons to wake the stick. 

 

In certain circumstances, there may be interference to the signal between your stick and 
the wireless receiver dongle in your computer caused by other wireless devices nearby. 
To switch to an interference-free wireless channel, press the scan button on the 
underside of your stick once. 

The Cyborg evo Wireless operates at a frequency of 2.402 – 2.480 GHz