HIMS International Corporation H318B Manual Do Utilizador

314 

 

1.  Press “ctrl-backslash” to open the Window-Eyes Control Panel. 
2.  Press “alt-f” to open the File menu. 
3.  Press the “up arrow”, or “down arrow” to move to Select Braille 

Display, and press “Enter”.    Or, just press B to open the Select 
Braille Display dialog without using the Arrow Keys. 

4.  Press the “down arrow” or the letter “b” until you hear Braille Sense 

OnHand. 

5.  Press “tab” to get to the COM port list box 
6.  Select the COM port that was given as the outgoing COM port when 

you setup the computer to interact with the Braille Sense OnHand via 
Bluetooth. 

7. Press “Enter” 
 

Now that you have set up Window-Eyes, you need to finish the setup on 
the Braille Sense OnHand. 
 

13.2.5.3 Setting up the Braille Sense OnHand 

 
1.  Press “F1” to get to the Program menu. 
2.  Press “Space-1” or “Space-4” to get to the Utilities menu, or just press 

the letter u”. 

3. Press “Enter”. 
4.  Press “Space-1” or “Space-4” to get to Terminal for screen reader, 

and press” enter”. 

5.  Press “Space-1” or “Space-4” to get to Bluetooth Serial Port, and 

press “Enter”. 

The Braille Sense OnHand should be connected as a Bluetooth Braille 
display.    To exit this mode from the Braille Sense OnHand, press 
“Space-z”.    Please note that “F1” on the Braille Sense OnHand will still 
take you to the Program menu.    This is to allow you to use the 
applications on the Braille Sense OnHand at the same time, and be able 
to switch back to using the Braille Sense OnHand as a Bluetooth Braille 
display.