HIMS International Corporation H318B Manual Do Utilizador
36
3.7 Message Display Time
You can select how long a Braille message will be displayed on the
Braille display. This feature is available when the voice is off. When in
“Stand by” and “Ignore” mode you can turn on the voice. The shortcut
key is “m (dots 1-3-4)”. You can select among “Stand by”, “Ignore”, and
1 to 10 seconds. The default is “3 seconds”. The value is increased
when you press the “Space” key and decreased when you press the
“Backspace” key To set “Stand by” mode, press the “Space” key until
you reach “Stand by”.. In this mode, the message will disappear when
you press any key. The higher value you select, the longer the
message remains. If you skip the message before the time you set, you
can clear the message by pressing any key. If you choose “Ignore”, then
messages won’t be shown on the display. If you have changed the
setting, press the “Enter” key to save the setting. You can also press
“tab (“Space-4-5”)” or “shift-tab (“Space-1-2”)” and press “Enter” on the
“Confirm” button”. If you do not want to save the setting, press “tab
(“Space-4-5”)” or “shift-tab (“Space-1-2”)”and “Enter” on the “Cancel”
button”. You can also cancel saving the setting by pressing “Space-z
(dots 1-3-5-6)” or “Space-e (dots 1-5)”.
3.8 Voice
This menu will allow you to turn the Braille Sense OnHand voice on or
off. The shortcut key is “v (dots 1-2-3-6)”. By default the voice is set to
on, so you will hear the Braille Sense OnHand speak. You can turn off
the voice with the ‘“Space”. You can toggle it on and off by pressing
“Backspace-F2” while you are using another program in the Braille
Sense OnHand without having to call up the “Global options”. If you
have changed the setting, press the “Enter” to save the setting. You can
also “tab (“Space-4-5”)” or “shift-tab (“Space-1-2”)” to the “Confirm”
button, and press “Enter”. If you do not want to save the setting, “tab
(“Space-4-5”)” or “shift-tab (“Space-1-2”)” to the “Cancel” button, and
then press “Enter”. You can also cancel saving the setting by pressing
“Space-z (dots 1-3-5-6)” or “Space-e (dots 1-5)”.
You can select how long a Braille message will be displayed on the
Braille display. This feature is available when the voice is off. When in
“Stand by” and “Ignore” mode you can turn on the voice. The shortcut
key is “m (dots 1-3-4)”. You can select among “Stand by”, “Ignore”, and
1 to 10 seconds. The default is “3 seconds”. The value is increased
when you press the “Space” key and decreased when you press the
“Backspace” key To set “Stand by” mode, press the “Space” key until
you reach “Stand by”.. In this mode, the message will disappear when
you press any key. The higher value you select, the longer the
message remains. If you skip the message before the time you set, you
can clear the message by pressing any key. If you choose “Ignore”, then
messages won’t be shown on the display. If you have changed the
setting, press the “Enter” key to save the setting. You can also press
“tab (“Space-4-5”)” or “shift-tab (“Space-1-2”)” and press “Enter” on the
“Confirm” button”. If you do not want to save the setting, press “tab
(“Space-4-5”)” or “shift-tab (“Space-1-2”)”and “Enter” on the “Cancel”
button”. You can also cancel saving the setting by pressing “Space-z
(dots 1-3-5-6)” or “Space-e (dots 1-5)”.
3.8 Voice
This menu will allow you to turn the Braille Sense OnHand voice on or
off. The shortcut key is “v (dots 1-2-3-6)”. By default the voice is set to
on, so you will hear the Braille Sense OnHand speak. You can turn off
the voice with the ‘“Space”. You can toggle it on and off by pressing
“Backspace-F2” while you are using another program in the Braille
Sense OnHand without having to call up the “Global options”. If you
have changed the setting, press the “Enter” to save the setting. You can
also “tab (“Space-4-5”)” or “shift-tab (“Space-1-2”)” to the “Confirm”
button, and press “Enter”. If you do not want to save the setting, “tab
(“Space-4-5”)” or “shift-tab (“Space-1-2”)” to the “Cancel” button, and
then press “Enter”. You can also cancel saving the setting by pressing
“Space-z (dots 1-3-5-6)” or “Space-e (dots 1-5)”.