HIMS International Corporation H432B Manual Do Utilizador

then press “Enter.” You can also cancel saving the setting by pressing 
“Space-z (dots 1-3-5-6)” or “Space-e (dots 1-5).” 

Note: If you change the Braille Code option while you are editing Braille 
in the Word Processor, current written Braille would be changed to 
different meanings in text. In order to avoid this situation, the Braille 
Code option needs to be changed before launching the Word Processor. 

You can choose when a Braille message will disappear from the Braille 
display. This setting will only work when the voice setting is set to “Off”. 
But “Stand by” and “Ignore” execute when the voice setting is set to “On”. 
The shortcut key is “m (dots 1-3-4).” The setting options that you can 
choose from are “Stand by,” “Ignore”, and 1 to 10 seconds. The default 
is “3 seconds.” The “Space” key increases the option by one second and 
the “Backspace” key decreases the option by one second. You can set 
the unit to standby mode by pressing the “Space” key until you reach 
“Stand by.” In this mode, the message will remain until you press a key. 
The higher value you select, the longer the message remains. If you 
read the message before setting the number of seconds, you can clear 
the message by pressing any key. If you choose “Ignore,” then 
messages will be ignored and won’t show on the display. If you have 
changed the setting, press “Enter” key to save the setting. You can also 
“tab (“Space-4-5”)” or “shift-tab (“Space-1-2”)” to the “Confirm” button, 
and press “Enter.” If you do not want to save the setting, “tab (“Space-4-
5”)” or “shift-tab (“Space-1-2”)” to the “Cancel” button, and then press 
“Enter.” You can also cancel saving the setting by pressing “Space-z 
(dots 1-3-5-6)” or “Space-e (dots 1-5).” 

The Braille Sense U2 can output speech in both US English and 
Mexican Spanish. You can change the Text-to-Speech (TTS) engine 
using the “Language” setting in the “Global Options”.