Sensors & Software Inc. NG250 Manual Do Utilizador
5-SmartTow Assembly
Noggin
28
The large odometer wheel attaches on the end of the Noggin with the 37-socket connector. Use
the U-brackets and log metal pins to secure the odometer T-bar to the SmartTow Brackets.
Orient the odometer so the black thumbscrew on the T-bar is facing upwards and the yellow
odometer cable is on the same side of the odometer wheel as the odometer receptacle on the
Noggin cable connection.
the U-brackets and log metal pins to secure the odometer T-bar to the SmartTow Brackets.
Orient the odometer so the black thumbscrew on the T-bar is facing upwards and the yellow
odometer cable is on the same side of the odometer wheel as the odometer receptacle on the
Noggin cable connection.
Make sure that the black Noggin-to-DVL cable turns to the front of the Noggin so it does not
interfere with the odometer wheel.
interfere with the odometer wheel.
Then connect the yellow odometer cable to the receptacle on the connector to the Noggin. Loop
the odometer cable so it does not interfere with the rotation of the odometer wheel and use velcro
straps to secure it to the T-bar.
the odometer cable so it does not interfere with the rotation of the odometer wheel and use velcro
straps to secure it to the T-bar.
Odometer calibration is critical for accurate data images. Odometer calibration instructions are
available in Section 12.5.2 Odometer Calibration.
available in Section 12.5.2 Odometer Calibration.