Adaptivation Inc. FH-ME Manual Do Utilizador
5
Transceiver Module
The Transceiver Module accepts the RF siganl from the
FreeHand and will allow activation of most electrical or AC
appliances.
The Transceiver Module accepts the RF siganl from the
FreeHand and will allow activation of most electrical or AC
appliances.
House Code
The house code is the frequency the FreeHand uses to transmit
to either a Wireless Receiver or a Transceiver Module. The
house code must be set to the same letter on both devices. Us-
ing different house codes can allow different individuals to
operate their own devices without interfering with each other.
The house code is the frequency the FreeHand uses to transmit
to either a Wireless Receiver or a Transceiver Module. The
house code must be set to the same letter on both devices. Us-
ing different house codes can allow different individuals to
operate their own devices without interfering with each other.
Unit Code
This code allows one Transceiver Module to operate up to 16
other appliance modules. The unit code on the FreeHand
must be set to the same number as the number on the appli-
ance module.
This code allows one Transceiver Module to operate up to 16
other appliance modules. The unit code on the FreeHand
must be set to the same number as the number on the appli-
ance module.
Modes of Control
Direct selection: The appliance activates for as long as the
switch is pressed.
switch is pressed.
Latched selection: Press once and the appliance turns on.
Press again and it turns off. The latch mode is effective when
a device needs to be turned on for an extended amount of time.
Press again and it turns off. The latch mode is effective when
a device needs to be turned on for an extended amount of time.