SAM Electronics GmbH NG3028X25KW Manual Do Utilizador

ED 3038 G 232 / 01 (2002-06)

 b_r1_e73.fm / 21.06.02

As long as the system is receiving the date and time via a connected sensor (e.g. from a GPS receiver),
these data are displayed in the relevant displays of the system, e.g. in the Quick Info Box of the radar
indicator

 1)

. If this external information is missing, the date and time with which the internal clock of the

relevant display electronics unit’s computer is running (computer time) are displayed instead.

So that the displayed time does not change if the sensor fails, a check should occasionally be made on
all radar indicators to make certain that the computer times are in agreement with UTC. If necessary, the
computer times must be corrected.

1.

Click on the index card Tools.

2.

Click on Date & Time.

3.

System time and date are displayed under Set Time and Set Date.

1.

Under Set Time or Set Date, click into the numerical areas of the value that is to be changed.

2.

Using the small keys in front of the numerical areas, set the values correctly.

☞

The set values have to be valid when the Apply & Save button will be clicked finally.

3.

The set values are taken over by pressing of the Apply & Save button.

4.

Abort and restart the program of the radar system, see 

.  

1)  

Plus the Zone Time. The time received is UTC; the computer times too must be UTC.

Change the value by 
means of these

Click on the value 
that is to be 
changed

By clicking, the computer 
time is set to the Set Time 
and Set Date

Transmitting and saving 
map files, see 

Handling of diskettes, 
see 

Deleting map files, see 

If there is no CHARTPILOT, the 
Track Transfer button, with 
which the tracks are transferred 
between the radar systems, is 
situated here - see