SAM Electronics GmbH NG3028X25KW Manual Do Utilizador

ED 3038 G 232 / 01 (2002-06)

 b_r1_e29.fm / 21.06.02

1.

First of all, it is necessary to define which catalog the track is to be stored in, and under which
number:
Defining the track number and the catalog: In the TRACK menu, click on the LOAD button, then
click on the desired catalog and see which track number is not yet being used. Close the Load
Track(s) list by means of CLOSE.

2.

Calling up the EDIT TRACK menu: In the TRACK
menu, open the Edit Track list by means of the EDIT
button. 

☞

All of the tracks loaded are listed there. Tracks are
loaded by calling them up for display - see 

.

Let the marker remain at <NEW>, and open the EDIT
TRACK menu by clicking on the EDIT button.

3.

Inputting the track number: In the small field behind
EDIT TRACK, enter the number of the track.

4.

Specifying the catalog: Click into the CATALOG field;
in the Catalog list which then opens, mark the desired
catalog and click on SELECT.

5.

Inputting the track name: It is entered in the TRACK
field.

Each waypoint has the following parameters:

-

Number of the waypoint. This identifies the waypoint, is allocated consecutively within the track,
and can be displayed in the PPI.

-

Name of the waypoint. This appears in the waypoint list when the Next Waypoint is being defined;
see 

. This entry is not obligatory.

< NEW >

BRIXAM-MIAMI 5

BRIXAM-MIAMI 2 

BRIXAM-FREEPORT

1306

1305

1304

Aborting of editing;
no saving of the entries

Ending the editing properly; 
entries are saved

Defining the waypoint 
position numerically

Editing function; this is 
activated (flashing) by 
clicking, and is selected with 
the MORE key.

Track Control Mode

Sailing Mode

Curve radius

Number and name of 
the waypoint

Catalog

Number and name of the track

Position of the waypoint