SAM Electronics GmbH NG3028X25KW Manual Do Utilizador

ED 3038 G 232 / 01 (2002-06) 

b_r1_e31.fm / 21.06.02

◆

Preparation and selection of the Multidisplay content

◆

Display to support the docking manoeuvre

◆

Enlarged display of the target video in the Zoom Display

◆

Depth Display

◆

Display of wind data, drift and set

In the Multidisplay, one of the following displays can appear:
-

the graphic displays

Docking,
Zoom,
Depth,
Wind/Set+Drift

-

the menus

for the trial manoeuvre,
for editing of the map,
of the track system (Load Tracks, Clear Tracks, Edit Tracks, Delete Tracks, Set System Track,

Select Next Waypoint),

-

the alarm list,

-

the sensor menus,

of the speed sensor,
of the position sensor.

The graphic displays are switched on and off in the UTILITIES menu after clicking on the MENU button;
for details, see the following subsections. How the menus are opened and closed is described in the rele-
vant sections. The alarm list is opened automatically by the occurrence of an alarm, and is closed auto-
matically when the alarm situation no longer exists. Furthermore, the display of the alarm list can be
suppressed and can be called up again at any time - see 

The display that is called up last covers over the one that already existed. However, the displays that are
covered over remain active, except for the sensor menus, which close automatically in any case 30
seconds after the last operating action.

After clicking on the OTHER button, all active displays are listed in the context menu. By clicking on the
desired display, that display is brought into the foreground.

All display settings mentioned in the following affect only the display on the radar indicator that is being
operated.

In the display ranges up to 1.5 NM, the distance and speed to a docking position can be displayed. For
this purpose, the docking position must first be defined on the PPI.