General Dynamics Itronix Corporation XC6250RIM801D Manual Do Utilizador
113
Section 10. Modems
79-0003-003 22 October 1999
Using the Internal Landline Modem
To use the internal landline modem
1 Plug one end of an RJ-11 cable into the RJ-11 connector on the
back of the computer.
2 Plug the other end of the RJ-11 cable into a telephone jack.
Make sure the COM3 IRQ is set correctly. Failure to do so may cause
some communication programs to lock up. See Section 5,
Customizing Settings.
3 Set up the HyperTerminal application, or another application, to use
the communications port COM3.
4 If necessary, set up other communication parameters in your
application to match the parameters set for the modem you are
talking to.
5 Use the HyperTerminal application, or another application, to
establish a connection to another computer.
RJ-11 Connector