General Dynamics Itronix Corporation XC6250RIM801D Manual Do Utilizador
81
Section 7. Managing Batteries and Power
79-0003-003 22 October 1999
Display
To conserve power, the system turns off the display when the computer
enters suspend mode. It automatically turns on when the computer is
turned back on.
Backlight
The display backlight can be turned on to make information on the
screen easier to read in low-light situations. To conserve power on the
monochrome displays only the system automatically turns off the
backlight after a period of inactivity. You must manually turn the
backlight on by pressing
FN+F1
when you resume. You can change the
time-out setting for the backlight in the System Configuration Utility
(SCU). See Section 5, Customizing Settings, for more information.
On a color display, the backlight is always on whenever the computer is
On a color display, the backlight is always on whenever the computer is
running. See About the Display Backlight below.
About the Display Backlight
10.4-inch color
•
Backlight is always on when the computer is runnning
•
FN+F1 toggles MaxBright on/off
•
FN+F2 dims
•
FN+F3 brightens
•
FN+F2 and FN+F3 are active only when MaxBright is off
10-inch monochrome
•
FN+F1 toggles the backlight on/off
•
FN+F2 dims
•
FN+F3 brightens